FIAT Ducato 2014 Front Camera (HALF) Calibration

Function Description:

The front camera calibration function needs to be performed in the following cases

• The front camera/ECU (HALF) has been replaced.
• The front windshield has been replaced.
• Structural changes/chassis adjustments.
• The level sensor has been replaced.
• There are related fault codes.

Operation guide:

1. Automatically identify the model Ducato through the ADAS calibration entrance VIN (If it is not recognized, the corresponding menu will be displayed, select manually and enter).

2. After selecting ADAS Calibration Function, click Front Camera Calibration.

3. Select Service Single Pole Calibration.

4. Situations where the current function needs to be performed.

5. Preparations required to perform the current function.

6. Follow the prompts, after the operation is complete, click Next Step.

7. Follow the prompts, after the operation is complete, click Next Step.

8. Follow the prompts, after the operation is complete, click Next Step.

9. Follow the prompts, after the operation is complete, click Next Step.

10. Follow the prompts, after the operation is complete, click Next Step.

11. Follow the prompts, after the operation is complete, click Next Step.

12. Follow the prompts, after the operation is complete, click Next Step.

13. Follow the prompts, after the operation is complete, click Next Step.

14. Follow the prompts, after the operation is complete, click Next Step.

15. Follow the prompts, after the operation is complete, click Next Step.

16. Follow the prompts, after the operation is complete, click Next Step.

17. Follow the prompts, after the operation is complete, click Next Step.

18. Follow the prompts, after the operation is complete, click Next Step.

19. Follow the prompts, after the operation is completed, click the calibration button to perform the calibration function.

20. Calibration complete.

21. Turn off the ignition, wait for the progress bar (or countdown) to end, and then turn on the ignition.

22. Print the report information after calibration.