2016 Lincoln MKX 360° Surround View Camera Calibration

Functional description

Mainly for the need to replace the IPM-B control module and replace the front or rear camera, this function needs to be performed.

Test conditions and precautions

This function needs to be performed with the target, and the site is flat and the environment is well-lit. If you replace the IPMB module, please make sure that the 'IPMB PMI' function has been executed. If you replaced the front and rear cameras, make sure you have performed 'LIN New Module Initialization - IPMB' and make sure there are no DTCs. And the voltage is between 11.8V - 15.0V.

Applicable models:

Lincoln MKX

Operation steps

1. Select Ford V47.50 or above.

2. Select [Automatically Search].

3. Select [ADAS(Advanced Driver Assistance Systems) Calibration].

4. Select [360 Camera Calibration].

5. Prompt the execution conditions of the function.

6. Follow the prompts in the figure.

7. Prompt where to place the target.

8. Turn the ignition switch to ON.

9. Start the 360° surround view camera, the screen clearly shows the target without reflection.

10. Prompt the calibration status and count down for 120 seconds.

11. The 360 surround view camera has been calibrated successfully and can be calibrated multiple times to ensure the best display status.

12. After the program runs, start the vehicle and check if there is a fault indicator light on the instrument panel. Calibration is complete.