FAQs

ADAS Service

EV Service

Tire Service

Auto Scanner

About EV

About Maintenance

• 331.

  What is vacuuming in AC?

  Vacuuming, also known as vacuum evacuation or vacuum blowing, is a critical step in the installation, maintenance, or repair of air conditioning (AC) and refrigeration systems. It involves removing air and moisture from refrigerant circuits and system components to create a vacuum or low-pressure environment.
  Here's why vacuuming is important in air conditioning systems:
  ① Dehumidification: Moisture in air conditioning systems can cause a variety of problems, including corrosion, refrigerant failure, and reduced cooling efficiency. Vacuuming can help prevent these problems by removing moisture from the system.
  ② Air removal: Air trapped in the refrigerant circuit will interfere with the normal operation of the system and reduce cooling performance. Evacuating removes air from the system, ensuring only refrigerant is circulating through the components.
  ③ Leak detection: Create a vacuum in the system to allow technicians to check for leaks. If the vacuum level decreases over time, it indicates a leak in the system that needs to be addressed before recharging the refrigerant.
  Vacuuming is a critical step in maintaining the efficiency, reliability, and longevity of your air conditioning and refrigeration systems. It helps ensure the system operates properly and provides optimal cooling performance.
  
• 332.

  What is active refrigerant recovery?

  Active refrigerant recovery is a process used in air conditioning and refrigeration system repairs to safely remove refrigerant from the system for recycling or disposal. Unlike passive methods that rely on pressure differences, active recovery involves the use of specialized equipment to actively extract the refrigerant.
  
  Active refrigerant recovery is an important step in the maintenance and repair of air conditioning and refrigeration systems and helps prevent environmental pollution through the safe handling and management of refrigerants, many of which are potent greenhouse gases that, if released into the atmosphere, can Cause global warming. Additionally, proper refrigerant recovery ensures compliance with environmental regulations and industry standards.
  
• 333.

  Will fuel injector cleaner help with slow acceleration?

  Injector cleaner can sometimes help with slow acceleration, especially if the problem is related to clogged or dirty injectors. Here are the benefits of using injector cleaner:
  ① Clean the fuel injector:
  Over time, fuel injectors can build up deposits, varnish, and carbon deposits. This affects fuel injection pattern and flow, resulting in inefficient combustion and slower acceleration. Injector cleaner is formulated to dissolve and remove these deposits, restoring proper fuel atomization.
  ② Improve combustion efficiency:
  When fuel injectors are clean and operating optimally, fuel is evenly distributed in a fine mist, resulting in more efficient combustion. Improved combustion efficiency contributes to better throttle response and acceleration.
  ③ Solve some blockage problems:
  A partially clogged fuel injector may not deliver the correct amount of fuel to the combustion chamber. Injector cleaner can help break down and clear these partial clogs, allowing for more consistent fuel flow.
  ④Restore power and performance:
  Injector cleaner can help restore lost power and performance by cleaning the fuel system, including injectors, intake valves, and combustion chambers. This results in better acceleration and overall engine responsiveness.
  
  While injector cleaner can be effective in solving some problems associated with sluggish acceleration, it's important to note that it may not solve all performance issues.If your vehicle still accelerates slowly despite using injector cleaner, there may be other underlying issues, such as problems with the air intake system, ignition system, or fuel delivery system. 
  
• 334.

  Can I mix injector cleaner with petrol?

  Yes, you can mix injector cleaner with gasoline. In fact, many injector cleaner products are designed to mix directly with vehicle fuel. These additives are formulated to help clean and maintain the fuel system, including fuel injectors, intake valves and combustion chambers.
• 335.

  Will new injectors improve fuel economy?

  In some cases, replacing old or faulty injectors with new ones can improve fuel economy. Here's how new injectors help improve fuel efficiency:
  ① Best fuel atomization:
  New fuel injectors are designed to provide optimal fuel atomization, ensuring a finer atomization of fuel for efficient combustion. This enhances the overall combustion process, thereby improving fuel economy.
  ② Consistent fuel delivery:
  A faulty injector may not deliver fuel evenly to all cylinders, causing uneven combustion. New injectors help maintain consistent fuel delivery, promoting smoother engine operation and increased efficiency.
  ③ Correct fuel injection mode:
  Over time, deposits and clogs can affect the injection pattern of your fuel injectors. New injectors with cleaning nozzles ensure correct injection pattern, promoting efficient combustion and reducing the risk of fuel waste.
  ④ Correct fuel pressure:
  Fuel injectors operate within a specific pressure range. A faulty injector can cause incorrect fuel pressure, affecting combustion efficiency. New injectors help maintain correct pressure and optimize fuel delivery.
  ⑤ Reduce fuel leakage:
  Old or damaged injectors can leak fuel into the combustion chamber when they should be shut off. This results in wasted fuel and reduced efficiency. New injectors with proper seals help minimize fuel leakage.
  ⑥ Improved engine performance:
  Upgrading to new injectors can enhance your engine's overall performance, resulting in smoother acceleration, better throttle response, and in some cases, improved fuel efficiency.
  
  It's worth noting that while the new injectors help improve fuel economy, other factors also affect overall efficiency. Regular maintenance practices, including a clean air filter, functioning oxygen sensors, and a well-maintained fuel system, are critical to achieving optimal fuel efficiency.