contact
| Rated Lifting Weight |
1.5T |
Platform Length | 1260mm |
|
Minimum Height |
1100mm |
Tilt Angle | 25° |
|
Maximum Height |
1850mm |
Ascending Time | 18s |
| Size |
1500x800x1100mm |
Descending Time | 11s(descending speed adjustable) |
Lower the lift to the bottom height and push it under the car that has been raised to the working height.
Align it with the load-bearing part of the car battery for stability.
Press the up button, the pump station rotates, the upper oil cylinder moves, the scissor arm rises by itself, and the side slide panel rises to the working position. Pay attention to whether the supporting part of the car battery is reliable, and whether the car is in a horizontal state, and then continue to operate after confirming that it is correct.
The switching valve controls the lifting of the upper and lower oil cylinders; press the up button, the pump station rotates, the oil cylinder moves, and the scissor arm rises or tilts according to the body; press the down button, the body descends with the oil cylinder to the lowest height.
Overload work is prohibited. When the lifting sound is abnormal or cannot be started, it should stop working, find out the reason, and eliminate the fault before continuing to use it.
Regularly add grease to the parts that need to be greased.
The hydraulic oil should be replaced after three months of operation, and once a year thereafter.
