OM201 is newly launched by SmartSafe. It is an oscilloscope with multimeter, which has the functions of both oscilloscope vs multimeter. It is suitable for current, voltage and resistance measurement of electric vehicles. Used with P01, it supports both wireless and wired communication methods, and is easy to operate. It is the first choice for car repair shop personnel!
contact
|
Functions |
Description |
√ |
|
Dual-channel Oscilloscope
|
Supports automatic measurement of 6 parameters, automotive testing, waveform recording and playback
|
√ |
|
Multimeter
|
Support DC/AC voltage, current measurement, resistance measurement, diode measurement, on-off measurement
|
√ |
|
Battery
|
3100 mAh/3.8 V
|
Dimension
|
160×195×42mm
|
|
Oscilloscope
|
Multimeter
|
||
|
No. of Channels
|
2
|
DC Voltage
|
±600 V
|
|
Bandwidt
|
10 MHz
|
AC Voltage
|
±600 V
|
|
Maximum Real-time Sampling Rate
|
100 Mbps
|
DC
|
±10 A
|
|
Time Base Range
|
1us/div~10s/div, step by 1~2~5 times
|
AC
|
±10 A
|
|
Sampling Methods
|
Common, peak value detection, average
|
Resistance
|
0~6MΩ
|
|
Input Coupling
|
DC, AC, and earth
|
Diode
|
0~2.0 V
|
|
Input Impedance
|
1MΩ±2%, parallel with 15pF±5pF
|
Continuity
|
Buzz when less than 50Ω
|
|
Input Capacitance
|
20 pF Max
|
/
|
|
|
Automatic Measurement
|
Peak-peak, value, average...
|
/
|
|
To avoid damage to the oscilloscope or probe, do not expose it to mist, liquids, or solvents.
Use a lint-free cloth to clean the outside of the Oscillograph Multimeter and probe from floating dust.
Use a soft cloth moistened with water to clean the oscilloscope.
To avoid damaging the surface of the Oscillograph Multimeter or probe, do not use any corrosive reagents or chemical cleaning reagents.
Learn more
Learn more
